1. Introduction Further to my last post (part 4) this is just a quick update on my findings with regard to the leakage, my first attempt at a fix, and some other thoughts and observations. 2. Removing filament Having discovered a filament leakage problem, I had to remove the hot end assembly from the printer. […]
1. Introduction Further to my last post (part 3), I have designed some test parts to highlight the “stripey toothpaste” effect and printed these using the Diamond hot end. I’ve also managed to re-configure the extruders on my machine, fit the new hot end, load and flush through some filament and attempt my first print. […]
1. Introduction Following on from my last post (part 2), I have completed the minor design changes and made and fitted the new parts. I’ve also received the 80 Watt heater cartridge that I ordered so I’ve fitted that too. I finally managed to track down a 60 Watt heater which I have only just […]
Hot filament and cold Coffee 