My 6 Input Mixing Hot End – Part 10

1. Introduction I have now made new parts and finally cured the leakage problems. I’ve also managed one test print which was promising, but I also ran into other problems which were entirely anticipated. Whether there are solutions to these problems remains to be seen. 2. New parts This is the new combining block. The […]

My 6 input mixing hot end – part 9

1. Introduction I now have some new heat breaks which I have fitted. This post will be an update on the tests that I have done and the latest problems that I have encountered. Apologies in advance if this is another seemingly verbose post but I find it useful to have everything written up so […]