Tag: Dynamic load balancing

Written by deckingman

Real 3D printing at high speeds (and even higher melt rates with a large nozzle).

More about print speeds, melt rates, pressure advance and so forth (and an embarrassing confession). INTRODUCTION This post builds on other work that I have done exploring high speed printing using Diamond hot ends and feeding filament equally into all the inputs. This is going to be a long post so although I recommend that […]

Written by deckingman

Dynamic force cancellation\load balancing.

Sub title – My crazy printer is now completely insane!   As followers of this blog will know, for various reasons, the moving mass of my printer is in the order of 4.2Kgs in the Y direction. That in itself isn’t an issue because I have demonstrated that I can print at up to 300mm/sec […]