Warning. To absorb all the information in this post, along with it’s accompanying video will take about half an hour or more. If you are short of time, come back later. Thanks to all those who have helped, I’ve finally got a link to the video to appear correctly in this blog. Had I previously […]
This is the third part of my experiences with the Diamond 5 colour hot end. For those who missed the first two instalments, they can be found here The Diamond 5 colour (“Fullcolor”) hot end (and other related stuff). and here The Diamond 5 Colour – part 2. To summarise where I left off, the […]
Just a quick post to say that I’ve uploaded the OpenScad file for my Diamond 5 colour mount design to thingiverse. You can find it here https://www.thingiverse.com/thing:2586159. This is a cut down version of what I use on my machine. That is to say, I’ve taken out the mounting arrangement that is very specific to […]
This is a follow up to this post The Diamond 5 colour (“Fullcolor”) hot end (and other related stuff). One of the issues I mentioned in the earlier post was that I suspected that the 5 colour version of the Diamond hot end suffered from “heat creep”. Or at least I was experiencing problems with PETG […]
Apologies to anyone who follows my blog for not posting much for a while but life has been very hectic lately. Anyway, I’ve finally got a bit of time to do this post. To make up for the lack of frequency of posts, this one will be quite long as I have a lot to […]
Hot filament and cold Coffee 